H3C S5120-EI Series, Руководство по эксплуатации

Страница: 707 / 1191

2-1
2
IPv4 ACL Configuration
When configuring an IPv4 ACL, go to these sections for information you are interested in:
z
Creating a Time Range
z
Configuring a Basic IPv4 ACL
z
Configuring an Advanced IPv4 ACL
z
Configuring an Ethernet Frame Header ACL
z
Copying an IPv4 ACL
z
Displaying and Maintaining IPv4 ACLs
z
IPv4 ACL Configuration Example
Creating a Time Range
Two types of time ranges are available:
z
Periodic time range, which recurs periodically on the day or days of the week.
z
Absolute time range, which takes effect only in a period of time and does not recur.
Configuration Procedure
Follow these steps to create a time range:
To do… Use the command… Remarks
Enter system view
system-view
––
Create a time range
time-range time-range-name
{
start-time to end-time days
[
from
time1 date1
] [
to time2 date2
] |
from
time1 date1
[
to time2 date2
] |
to
time2 date2
}
Required
Display the configuration
and status of one or all time
ranges
display time-range
{
time-range-name
|
all
}
Optional
Available in any view
You may create a maximum of 256 time ranges.
A time range can be one of the following:
z
Periodic time range created using the
time-range time-range-name start-time to end-time days
command. A time range thus created recurs periodically on the day or days of the week. A periodic
time range is active only when the system time falls within it.
z
Absolute time range created using the
time-range time-range-name
{
from time1 date1
[
to time2
date2
] |
to time2 date2
} command. Unlike a periodic time range, a time range thus created does
not recur. For example, to create an absolute time range that is active between January 1, 2004
00:00 and December 31, 2004 23:59, you may use the
time-range test from 00:00 01/01/2004 to
23:59 12/31/2004
command.
z
Compound time range created using the
time-range time-range-name start-time to end-time days
{
from time1 date1
[
to time2 date2
] |
to time2 date2
} command. A time range thus created recurs