Operation Manual – File System Management
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 File System Management Configuration
1-10
III. Restoring the startup configuration file
To do…
Use the command…
Remarks
Restore the startup
configuration file
restore
startup-configuration
from src-addr filename
Required
Available in user view
Note:
z
Before restoring a configuration file, you should ensure that the server is reachable,
the server is enabled with TFTP service, and the client has permission to read and
write.
z
After the command is successfully executed, you can use the
display startup
command (in user view) to verify if the filename of the startup configuration file is the
same with the
filename
argument, and use the
dir
command to verify if the restored
file exists.
1.3 Displaying and Maintaining Device Configuration
To do…
Use the command…
Remarks
Display the configuration
file saved in the storage
device
display saved
-
configuration
[
by-linenum
]
Available in any
view
Display the configuration
file used for this and next
startup
display startup
Available in any
view
Display the validated
configuration in current
view
display this
[
by-linenum
]
Available in any
view
Display current
configuration
display current-configuration
[ [
configuration
[
configuration
] |
controller
|
interface
[
interface-type
]
[
interface-number
] ] [
by-linenum
]
[
|
{
begin
|
include
|
exclude
}
text
] ]
Available in any
view
