Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 5 IPv6 BGP Configuration
5-8
To do...
Use the command...
Remarks
Enable the state change
logging for a peer or peer
group
peer
{
ipv6-group-name |
ipv6-address
}
log-change
Optional
Enabled by default
Note:
Refer to the part discussing
IPv4 routing commands
for information about the
log-peer-change
command.
5.4 Controlling Route Distribution and Reception
The task includes routing information filtering, routing policy application and route
dampening.
5.4.1 Prerequisites
Before configuring this task, you have:
z
Enabled the IPv6 function
z
Configured the IPv6 BGP basic functions
5.4.2 Configuring IPv6 BGP Route Redistribution
Follow these steps to configure IPv6 BGP route redistribution and filtering:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
—
Enter IPv6 address family
view
ipv6-family
—
Enable default route
redistribution into the IPv6
BGP routing table
default-route imported
Optional
Not enabled by default
Enable route
redistribution from
another routing protocol
import-route
protocol
[
process-id
] [
med
med-value
|
route-policy
route-policy-name
]*
Required
Not enabled by default