44
Step
Command
Remarks
2.
Set the system LACP
priority.
lacp
system-priority
system-priority
Optional.
By default, the system LACP priority is
32768.
Changing the system LACP priority might
affect the aggregation state of the ports
in the dynamic aggregation group.
3.
Create a Layer 3
aggregate interface
and enter Layer 3
aggregate interface
view.
interface route-aggregation
interface-number
When you create a Layer 3 aggregate
interface, the system automatically
creates a Layer 3 static aggregation
group numbered the same.
4.
Configure the
aggregation group to
operate in dynamic
aggregation mode.
link-aggregation mode dynamic
By default, an aggregation group
operates in static aggregation mode.
5.
Exit to system view.
quit
N/A
6.
Assign an Ethernet
interface to the
aggregation group.
a.
Enter Layer 3 Ethernet
interface view:
interface
interface-type
interface-number
b.
Assign the Ethernet interface
to the aggregation group:
port link-aggregation group
number
Repeat these two sub-steps to assign
more Layer 3 Ethernet interfaces to the
aggregation group.
7.
Assign the port an
aggregation priority.
link-aggregation
port-priority
port-priority
Optional.
By default, the aggregation priority of a
port is 32768.
Changing the aggregation priority of a
port might affect the aggregation state of
ports in the dynamic aggregation group.
8.
Set the LACP timeout
interval on the port to
the short timeout
interval (1 second).
lacp period short
Optional.
By default, the LACP timeout interval on a
port is the long timeout interval (30
seconds).
Configuring an aggregate interface
Most of the configurations that can be performed on Layer 2 or Layer 3 Ethernet interfaces can also be
performed on Layer 2 or Layer 3 aggregate interfaces.
Configuring the description of an aggregate interface
You can configure the description of an aggregate interface for administration purposes such as
describing the purpose of the interface.
To configure the description of an aggregate interface:
