4
Figure 3 Installing slide rails
(1) Locating pin
(2) Mark the cage nuts installation holes
(3) Install cage nuts in the marked square holes
(4) Use screws to secure a slide rail to the rack post
Installing cage nuts for attaching mounting
brackets
Before mounting the chassis in the rack, install cage nuts on the front rack posts for attaching the
mounting brackets by performing the following steps:
1.
As shown in
, determine the cage nut installation holes and then mark them on the
front rack post.
2.
Install cage nuts in the marked square holes on the front rack posts. If you have installed
screws in the two uppermost holes, remove them first.
1RU
1RU
1
2
3
4
