H3C S12500X-AF Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 21

H3C S12500X-AF Series Скачать руководство пользователя страница 10

8

[DeviceA-Bridge-Aggregation1023] port access vlan 40

[DeviceA-Bridge-Aggregation1023] quit

# Create VLAN 41, assign an IP address to VLAN-interface 41, and assign Bridge-Aggregation
1024 to VLAN 41.

[DeviceA] vlan 41

[DeviceA-vlan41] quit

[DeviceA] interface vlan-interface 41

[DeviceA-Vlan-interface41] ip address 172.24.41.254 24

[DeviceA-Vlan-interface41] quit

[DeviceA] interface bridge-aggregation 1024

[DeviceA-Bridge-Aggregation1024] port access vlan 41

[DeviceA-Bridge-Aggregation1024] quit

3.

Configure OSPF between the IRF fabric and the egress routers.

[DeviceA] ospf

[DeviceA-ospf-1] import-route direct

[DeviceA-ospf-1] area 0

[DeviceA-ospf-1-area-0.0.0.0] network 172.24.40.0 0.0.0.255

[DeviceA-ospf-1-area-0.0.0.0] network 172.24.41.0 0.0.0.255

[DeviceA-ospf-1-area-0.0.0.0] quit

[DeviceA-ospf-1] quit

Configuring SW 1

1.

Configure a link aggregation:

# Create Bridge-Aggregation 1 and enable the dynamic aggregation mode. You must enable
the dynamic aggregation mode because this link aggregation will be used for LACP MAD.

<SW1> system-view

[SW1] interface bridge-aggregation 1

[SW1-Bridge-Aggregation1] link-aggregation mode dynamic

[SW1-Bridge-Aggregation1] quit

# Assign the uplink ports that connect to the IRF fabric to Bridge-Aggregation 1.

[SW1] interface ten-gigabitethernet 4/0/1

[SW1-Ten-GigabitEthernet4/0/1] port link-aggregation group 1

[SW1-Ten-GigabitEthernet4/0/1] quit

[SW1] interface ten-gigabitethernet 4/0/2

[SW1-Ten-GigabitEthernet4/0/2] port link-aggregation group 1

[SW1-Ten-GigabitEthernet4/0/2] quit

2.

Configure VLANs, ports, and IP addresses:

# Create all VLANs.

[SW1] vlan all

# Configure VLAN settings on the uplink aggregate interface that connects to the IRF fabric.

[SW1] interface bridge-aggregation 1

[SW1-Bridge-Aggregation1] port link-type trunk

[SW1-Bridge-Aggregation1] undo port trunk permit vlan 1

[SW1-Bridge-Aggregation1] port trunk permit vlan 10

[SW1-Bridge-Aggregation1] quit

# Configure VLAN settings on the port that connects to Server Group 1.

[SW1] interface gigabitethernet 3/0/1

[SW1-GigabitEthernet3/0/1] port link-type trunk

«
...
8
9
10
11
12
...
»

Содержание S12500X-AF Series






















Отзывы:

Нет отзывов