manualshive.com logo in svg

H3C S12500R Series, Руководство по установке

Поделиться
Скачать
H3C S12500R Series Скачать руководство пользователя страница 45

 

3-13 

 

IMPORTANT: 

A fan tray covers fabric module slots. Install fabric modules or filler panels in the fabric module slots 
before installing a fan tray. 

•

  If a fabric module is installed in a fabric module slot, make sure the spring clips lock the ejector 

levers of the fabric module in place. 

•

  If a fabric module filler panel is installed in a fabric module slot, make sure the ejector levers of 

the fabric module filler panel are secured in place by captive screws. 

 

 

IMPORTANT: 

Captive screws are required to install a fan tray on the device. As a best practice, fasten a captive 
screw to a torque of 5.5 kgf-cm (4.77 lbf-in). 

 

The device has two fan tray slots. You can install one fan tray or two fan trays in 1+1 redundancy for 
the device. As a best practice, install a fan tray in each slot for redundancy and to reduce noises. 

Installing fan trays for the S12516R and S12508R 

 

IMPORTANT: 

The fan tray is high and heavy. To avoid device damage and bodily injury, use two people to install 
or remove a fan tray. 

 

To install a fan tray for the S12516R or S12508R: 

1. 

Orient the fan tray with the upside up based on the orientation of characters on the fan tray and 
align the fan tray with the fan tray slot. 

2. 

Holding the upper fan tray handle with one hand and the lower fan tray handle with the other 
hand, insert the fan tray into the slot. Keep the fan tray as straight as possible. 

To install a fan tray in FAN1 slot, align the top and left edges of the fan tray in the slot. To install 
a fan tray in FAN2 slot, align the top and right edges of the fan tray in the slot. 

3. 

Fasten the captive screws on the fan tray. 

Содержание S12500R Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды