12
Table 10 Slide rails available for the switch
Item
LSEM1BSR
RL-1U-A
LSXM1BSR
Part No.
0231AJAP
0231AJE5
0231A4EK
Adjustmen
t range
380 mm to 630 mm (14.96
in to 24.80 in)
380 mm to 630 mm (14.96
in to 24.80 in)
630 mm to 900 mm (24.80 in to
35.43 in)
Load
bearing
capacity
100 kg (220.46 lb)
200 kg (440.92 lb)
400 kg (881.83 lb)
Occupied
space
N/A
1 U
1 U
Applicable
rack depth
0.6 m (1.97 ft), 0.8 m (2.62
ft)
0.6 m (1.97 ft), 0.8 m (2.62
ft)
1.0 m (3.28 ft), 1.2 m (3.94 ft)
Applicable
switch
model
S10506X-G/S10506X-G-
PoE
All S10500X-G switch
models
All S10500X-G switch models
NOTE:
The applicable rack depths in
are for your reference only. Before you install slide rails,
make sure the rack depth is in the adjustment range of the slide rails.
Modules
The switch supports varieties of modules that are different in power consumptions. For a same
module, the power consumption varies by its state.
•
The minimum power consumption of a module refers to the power consumed by the module
when it is running with all its ports down and its fiber ports not installed with transceiver
modules.
•
The typical power consumption of a module refers to the power consumed by the module when
it is running with 50% of its ports connected and at 50% load.
•
The maximum power consumption of a module refers to the power consumed by the module
when it is running with all of its ports connected and at full load.
NOTE:
Module dimensions are expressed in the Height (H) × Width (W) × Depth (D) format:
•
Height
—Height of the front panel of the module.
•
Width
—Width of the front panel of the module.
•
Depth
—Depth from the front panel of the module to the connector (Including the connector, but
excluding the ejector levers and captive screws).
NOTE:
For transceiver modules and cables available for a module, see
H3C S10500X-G Switch Series
Cards and Transceiver Modules Compatibility Matrixes
.