2-30
Figure2-40 Installing an expansion card with one ejector lever
5.
(Optional.) If the expansion card has two ejector levers, perform the following steps to install it:
a.
Rotate outwards the left and right ejector levers of the card, as shown by callout 1 in
b.
Gently push the expansion card into the slot along the guide rails until the expansion card
has good contact with the chassis, as shown by callout 2 in
c.
Rotate inwards the left and right ejector levers, as shown by callout 3 in
d.
Use a Phillips screwdriver to fasten the captive screws on the expansion card, as shown by
callout 4 in
2
1
3
4