8
CAUTION:
A DC power cord includes a negative wire and a positive wire.
When connecting the power cord to the power source, make
sure the circuit breaker switches for the positive wire and the
negative wire are both turned off.
To connect the power cord:
1.
Use the Phillips screwdriver to loosen the screw on the terminal
protection cover and then remove the protection cover from the
power supply.
2.
Use the Phillips screwdriver to loosen the screws on the wiring
terminals.
3.
Connect one end of the blue power wire marked with – to the
negative terminal (–) on the power supply and fasten the screw.
4.
Connect one end of the black power wire marked with + to the
positive terminal (+) on the power supply and fasten the screw.
5.
Put the protection cover on the wiring terminals and fasten the
screw.
