6
Figure 2 Power supply installation procedure
Before the installation, prepare an ESD wrist strap and a Phillips
screwdriver yourself.
Installing the power supply
To install the power supply:
1.
Wear an ESD wrist strap, and make sure the strap makes good
skin contact and is reliably grounded.
2.
Remove the filler panel, if any, from the power supply slot.
The device requires a minimum of one power supply to supply
power so it comes with one slot that does not have a filler panel
installed. If you install the power supply in this slot, skip this
step.
3.
Unpack the power supply.
4.
Use the Phillips screwdriver to loosen the captive screw on the
power supply handle and then pull the handle outward.
