5-3
Item
Specifications
•
192 VDC to 288 VDC (240 HVDC power source) @ 2000 W
Rated input current range
•
12 A @ 100 VAC to 120 VAC
•
12 A @ 200 VAC to 240 VAC
•
10 A Max @ 240 VDC
Maximum rated heat dissipation
•
3892 BTU/hr @ 100 VAC
•
7636 BTU/hr @ 220 VAC
•
7593 BTU/hr @ 240 VAC
•
7596 BTU/hr @ 240 VDC
•
7552 BTU/hr @ 270 VDC
Maximum rated output power
2000 W
Frequency
50/60Hz @ 100 VAC to 240 VAC
Efficiency at 50% load
80 Plus Platinum
Temperature
•
Operating: 0°C to 55°C (32°F to 131°F)
•
Storage: –40°C to +85°C (–40°F to +185°F)
Operating humidity
5% to 90%
Maximum altitude
5000 m (16404.20 ft)
Redundancy
Yes
Cold backup
Yes
4
LEDs
Table4-1 Power supply LED description
LED status
Description
Steady green
The power supply is operating correctly.
Flashing green (1 Hz)
Power is being input correctly but the system is not powered on.
Flashing green (0.33 Hz)
The power supply is in standby state and does not output power.
Flashing green (2 Hz)
The power supply is updating its firmware.
Steady amber
•
The power supply is faulty.
•
The power supply does not have power input, but the other
power supply has correct power input.
Flashing amber (1 Hz)
An alarm has occurred on the power supply.
Off
No power supplies have power input, which can be caused by an
incorrect power cord connection or power source shutdown.
5
Installing and removing the power
supply
For information about installing and removing the power supply, see the user guide for the device.
