H3C Neocean IX1000, Руководство по установке

Страница: 44 / 64

Installation Manual
Neocean IX1000 Network Storage System
Chapter 4 Initial Configuration and System Startup Information
4-5
3) Click <OK> and set the parameters shown in Figure 4-5 as follows:
z
Bits per second: 115200
z
Data bits: 8
z
Parity: None
z
Stop bits: 1
z
Flow control: None
Figure 4-5
Serial port properties
4) Click <OK>.
The system displays the HyperTerminal window, as shown in Figure 4-6 .
Properties Properties
Figure 4-6
HyperTerminal window
Select [Properties] on the HyperTerminal dialog box to enter the [com_1 Properties]
window. As shown in
Figure 4-7 , click the [Settings] tab, select “VT100” for
terminal
emulation
, and click <OK>.