H3C MSR810, Справочник по командам

Страница: 66 / 389

54
ppp mp min-bind
Use
ppp mp min-bind
to set the minimum number of PPP links in an M P bundle on a dialer
interface.
Use
undo ppp mp min-bind
to restore the default.
Syntax
ppp mp min-bind min-bind-num
undo ppp mp min-bind
Default
On a dialer interface, the minimum number of PPP links in an MP bundle is 0, which means that MP
dial-up relies on traffic detection.
Views
Dialer interface view
Predefined user roles
network-admin
Parameters
min-bind-num
: Specifies the minimum number of PPP links in an MP bundle, in the range of 0 to 128.
Usage guidelines
This command specifies the minimum number of PPP links in a MP bundle to ensure the minimum
bandwidth for the service.
When the minimum number of PPP links is set to a non -zero value, subsequent MP dial-up
operations will not depend on traffic detection, but existing dial-up connections will be removed upon
timeout.
The min-bind-num argument cannot be greater than the maximum number set with the
ppp mp
max-bind
command.
Examples
# Set the minimum number of PPP links in an MP bundle to 4 on Dialer 0.
<Sysname> system-view
[Sysname] interface dialer 0
[Sysname-Dialer0] ppp mp min-bind 4
Related commands
ppp mp max-bind
ppp mp min-fragment
Use
ppp mp min-fragment
to set the minimum MP packet fragmentation size on an interface.
Use
undo ppp mp min-fragment
to restore the default.
Syntax
ppp mp min-fragment size
undo ppp mp min-fragment
Default
The minimum MP packet fragmentation size is 128 bytes on an interface.