2-4
Table2-1 Wall mounting hole spacing
Spacing
Device models
160 mm (6.30 in)
RT-MSR810, RT-MSR810-LM, RT-MSR810-LM-CNDE-SJK, RT-
MSR810-W-DB, RT-MSR810-W, RT-MSR810-W-LM, RT-MSR810-LM-
HK, RT-MSR810-W-LM-HK, RT-MSR810-LM-GL, RT-MSR810-W-LM-
GL, RT-MSR810-CNDE-SJK
152 mm (5.98 in)
RT-MSR810-SI, RT-MSR810-EI, RT-MSR810-LM-SI, RT-MSR810-LM-
EA, RT-MSR810-LM-EI
2.
Drill holes with a minimum depth of 22 mm (0.87 in) in the marked locations.
3.
Hammer an anchor into each hole until the anchor is flush with the wall.
4.
Drive a screw into each anchor and make sure the screw protrudes a minimum of 1.5 mm
(0.06 in) from the wall.
5.
Hang the router on the screws.
Position the router so the network interfaces face downwards, and the sides with ventilation
openings are perpendicular to the ground, as shown in
Figure2-3 Wall-mounting the router (RT-MSR810-W-LM)
