1
Preparing for installation
Table 1 This document applies to the following device models:
Model Product
code
MSR2600-6-X1-GL RT-MSR2600-6-X1-GL
Safety recommendations
Safety symbols
When reading this document, note the following symbols:
WARNING
means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION
means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
•
Keep the router and installation tools away from walk areas.
•
Place the router in a dry and flat location and make sure anti-slip measures are in place.
•
Remove all external interface cables and power cords before moving the router.
Electricity safety
•
Locate the power-off switch in the equipment room before installation. Shut off the power
immediately if an accident occurs. Disconnect the power cord from the router if necessary.
•
Make sure the router is reliably grounded.
•
Connect the interface cables correctly.
•
Use an uninterrupted power supply (UPS).
•
Always make sure the power has been disconnected during the installation or replacement
procedure.
Examining the installation site
The router can only be used indoors. To ensure correct operation and a long lifespan for your
router, install it in an environment that meets the requirements described in the following
subsections.
Temperature and humidity
Maintain the temperature and humidity in the equipment room as described in
.
•
Lasting high relative humidity can cause poor insulation, electricity leakage, mechanical
property change of materials, and metal corrosion.
