16
Voice probe commands
dsp-capture pcm
Use
dsp-capture pcm
to capture DSP PCM packets on a voice interface.
Syntax
dsp-capture pcm
if-name
{
start
|
stop
}
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name
: Specifies a voice interface.
start
: Starts capturing packets.
stop
: Stops capturing packets.
Usage guidelines
The router can capture DSP PCM packets only on one voice interface. To capture packets on another
voice interface, you must stop capturing packets on the previous voice interface.
display hardware internal dspmem
Use
display hardware internal dspmem
to display DSP memory information.
Syntax
display hardware internal dspmem
if-name dsp-num dsp-addr
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name
: Specifies a voice interface.
dsp-num
: Specifies a DSP by its number in the range of 0 to 15.
dsp-addr
: Specifies a DSP memory address in the range of 0x00000 to 0x27FFF.
