22
2.
(Optional.) Assign a domain ID to the IRF fabric.
irf domain domain-id
By default, the domain ID of an IRF fabric is 0.
3.
Create a VLAN dedicated to BFD MAD.
vlan
vlan-id
By default, only VLAN 1 exists.
4.
Return to system view.
quit
5.
Enter Ethernet interface view or interface range view.
Enter Ethernet interface view.
interface interface-type interface-number
Enter interface range view. Choose one of the following commands:
interface range
{
interface-type interface-number
[
to
interface-type interface-number
]
}
&<1-24>
interface range
name
name
[
interface
{
interface-type
interface-number
[
to interface-type interface-number
]
}
&<1-24>
]
To assign a range of ports to the BFD MAD VLAN, enter interface range view.
To assign one port to the BFD MAD VLAN, enter Ethernet interface view.
6.
Assign the port or the range of ports to the BFD MAD VLAN.
Assign the ports to the VLAN as access ports.
port access vlan
vlan-id
Assign the ports to the VLAN as trunk ports.
port trunk permit vlan vlan-id
Assign the ports to the VLAN as hybrid ports.
port hybrid vlan vlan-id
{
tagged
|
untagged
}
The link type of BFD MAD ports can be access, trunk, or hybrid.
The default link type of a port is access.
7.
Return to system view.
quit
8.
Enter VLAN interface view.
interface vlan-interface vlan-interface-id
9.
Enable BFD MAD.
mad bfd enable
By default, BFD MAD is disabled.
10.
Assign a MAD IP address to a member device on the VLAN interface.
mad ip address ip-address
{
mask
|
mask-length
}
member
member-id
By default, no MAD IP addresses are configured on any VLAN interfaces.
Repeat this step to assign a MAD IP address to each member device on the VLAN interface.
Configuring BFD MAD on a Layer 3 aggregate interface
1.
Enter system view.
system-view
2.
(Optional.) Assign a domain ID to the IRF fabric.
irf domain domain-id
By default, the domain ID of an IRF fabric is 0.
Содержание MSR 5600
Страница 7: ...ii...
