127
Task Command
Display information about inbound dynamic
NAT.
display nat inbound
Display NAT logging configuration.
display nat log
Display information about NAT NO-PAT entries
(MSR 2600/MSR 3600).
display nat no-pat
Display information about NAT NO-PAT entries
(MSR 5600).
display nat no-pat
[
slot
slot-number
]
Display information about outbound dynamic
NAT.
display nat outbound
Display NAT Server configuration.
display nat server
Display internal server group configuration.
display nat server-group
[
group-number
]
Display sessions that have been NATed (MSR
2600/MSR 3600).
display nat session
[ {
source-ip
source-ip
|
destination-ip
destination-ip
} * [
vpn-instance
vpn-name
] ] [
verbose
]
Display sessions that have been NATed (MSR
5600).
display nat session
[ {
source-ip
source-ip
|
destination-ip
destination-ip
} * [
vpn-instance
vpn -name
] ] [
slot
slot-number
] [
verbose
]
Display static NAT mappings.
display nat static
Display NAT statistics (MSR 2600/MSR 3600).
display nat statistics
Display NAT statistics (MSR 5600).
display nat statistics
[
slot
slot-number
]
Clear NAT sessions.
reset nat session
NAT configuration examples
One-to-one static NAT for internal-to-external access
Network requirements
Configure static NAT to allow the user at 10.110.10.8/24 to access the Internet.
Figure 52
Network diagram
Host
10.110.10.8/24
Server
Internet
GE1/1
10.110.10.1/24
GE1/2
202.38.1.1/16
Router
Содержание MSR 2600 Series
