H3C MSR 2600 Series Скачать руководство пользователя страница 26

Страница: 26 / 64

Grounding the router with a grounding strip

If a grounding strip is available at the installation site, connect the grounding cable to the grounding

strip.
Follow the same procedures in "

Grounding the router through the rack

" to connect the grounding cable

to the grounding strip.

Figure 15

Grounding the router with a grounding strip

Grounding the router with a grounding conductor buried in the
earth ground

If the installation site has no grounding strips, but earth ground is available, hammer a 0.5 m (1.64 ft) or

longer angle iron or steel tube into the earth ground to serve as a grounding conductor. The steel tube

must be zinc-coated. Weld the yellow-green grounding cable to the angel iron or steel tube and treat the

joint for corrosion protection.

Installing a 3G SIM card

CAUTION:

To avoid damage to the 3G SIM card holder, do not use excessive force when installing the 3G SIM card.

Only the MSR 26-00-5 router supports a 3G SIM card. The 3G SIM card is not hot swappable on the

MSR 26-00-5 router.
The MSR 26-00-5-GU-CNDE router supports the WCDMA/GSM SIM card. The MSR 26-00-5-GT-CNDE

supports the CDMA2000 SIM card.

Содержание MSR 2600 Series

































































Результаты поиска

Содержание MSR 2600 Series

Отзывы:

Похожие инструкции для MSR 2600 Series

Бренды по названию

Популярные бренды

H3C MSR 2600 Series, Руководство по установке

Результаты поиска

Содержание MSR 2600 Series

Отзывы:

Похожие инструкции для MSR 2600 Series

Бренды по названию

Популярные бренды