4-4
For local configuration, after you power on the router, you can see the startup banner. See section
“Startup Process”.
3) After completing the power-on self-test (POST), the system asks you to press <Enter>. When the
prompt appears, you may proceed to configure the router.
Startup Process
During the power-on or reboot process, the console terminal displays the following information first:
Do you want to go on checking sdram? Yes or not(Y/N)
If you enter <N> or wait for two seconds, the system runs the Boot ROM program and the following
banner appears on the console screen:
system start booting......Version 2.11
Press CTRL+D to stop auto-boot
Press <Ctrl+D> and the system will enter the basic BootROM menu. Otherwise, the system will enter
the program decompression process of the extended BootROM segment.
The system enters the basic BootROM menu only if <Ctrl+D> is pressed immediately (within 3 seconds)
after the statement “Press CTRL+D to stop auto-boot” appears; otherwise, the system will enter the
extended BootROM decompression process.
Booting Normal Extended BootRom
Decompressing...done!
Ensure the baudrate is set to 9600bps! Starting at 0xa00000...
*******************************************************
* *
* MSR20-21 BOOTROM, Version 2.11 *
* *
*******************************************************
Copyright(c) 2004-2007
Compiled date: Apr 09 2007, 08:52:28
CPU type : MPC8248
CPU L1 Cache : 16KB
CPU Clock Speed : 400MHz
Memory Type : SDRAM
Memory Size : 256MB
Memory Speed : 100MHz
BootRom Size : 4096KB
CPLD Version is 2.00
HardWare Version is 3.00
