H3C MS4600 Series, Справочник по командам

Страница: 14 / 43

8
Field Description
Member ID
MAD IP address
Neighbor
MAD status
BFD MAD details:
•
Member ID —IRF member ID of the local device.
•
MAD IP address —MAD IP address of a member device.
•
Neighbor —IRF member ID of the neighboring member device.
•
MAD status —BFD MAD link state. The following values are available:

Normal —BFD MAD is operating correctly.

Faulty —BFD MAD is not operating correctly. Check the BFD MAD
link for connectivity issues.

N/A —BFD MAD link status cannot be detected. If BFD MAD is
enabled on a management Ethernet port, it is normal that this field
displays
N/A .
easy-irf
Use
easy-irf
to bulk-configure basic IRF settings for an IRF member device.
Syntax
easy-irf [ member member-id [ renumber new-member-id ] domain domain-id
[ priority priority ] [ irf-port1 interface-list1 ] [ irf-port2
interface-list2 ] ]
Views
System view
Predefined user roles
network-admin
Parameters
member member-id
: Specifies the member ID of a member device. The value range for the
member ID is 1 to 10.
renumber new-member-id
: Specifies a new member ID for the device. The value range for the
member ID is 1 to 10. The member device automatically reboots for the new member ID to take
effect. If you do not specify this option, the command does not change the member ID.
domain domain-id
: Specifies an IRF domain ID in the range of 0 to 4294967295. Assign the
same domain ID to all devices you are adding to the same IRF fabric.
priority priority
: Specifies an IRF priority in the range of 1 to 32. The greater the priority
value, the higher the priority. A member with higher priority is more likely to be the master.
irf-port1 interface-list1
: Specifies interfaces bound to IRF-port 1. The
interface-list1
argument represents a space-separated list of up to n interface items. Each
interface item specifies one interface in the
interface-type interface-number
form. In
Release 6510, the value for n is 8. In R6515P06 and later, the value for n is 16.
irf-port2 interface-list2
: Specifies interfaces bound to IRF-port 2. A physical interface
can be bound to only one IRF port. The
interface-list2
argument represents a
space-separated list of up to n interface items. Each interface item specifies one interface in the
interface-type interface-number
form. In Release 6510, the value for n is 8. In R6515P06
and later, the value for n is 16.
Usage guidelines
This command bulk-configures basic IRF settings for a member device, including the member ID,
domain ID, priority, and IRF port bindings.