H3C LSWM18CQ, Руководство пользователя

Страница: 8 / 10

8
▌
Installing and removing the card
CAUTION:
•
Before you install or remove the card, wear an ESD wrist strap
and make sure the strap makes good skin contact and is
reliably grounded.
•
To avoid device damage, do not use excessive force when you
install or remove the card.
•
The LSWM18CQ interface card is hot swappable. However, do
not install or remove it during the startup of the switch.
Installing the card
1.
Remove the filler panel (if any) from the target slot.
Keep the removed filler panel secure for future use.
2.
Unpack the interface card.
Figure 2 LSWM18CQ interface card
(1) Ejector lever (2) Latch
3.
Press the latch on the card to release the ejector lever.
4.
As shown by callout 1 in Figure 3 , insert the card slowly into the
slot along the guide rails.
5.
Rotate inward the ejector lever as shown by callout 2 in Figure 3
until the latch locks the ejector lever in place.