H3C LSWM12H2Q, Руководство пользователя

Страница: 5 / 9

5
Table 8 QSFP28 DAC cables available for the QSFP28 ports
QSFP28 DAC cable Cable length Data rate
QSFP-100G-D-CAB-1M 1 m (3.28 ft)
100 Gbps
QSFP-100G-D-CAB-3M 3 m (9.84 ft)
NOTE:
As a best practice, use H3C QSFP+/QSFP28 transceiver modules
and QSFP+/QSFP28 DAC cables for the QSFP28 ports on the
LSWM12H2Q interface card. The H3C QSFP+/QSFP28
transceiver modules and QSFP+/QSFP28 DAC cables available
for the card are subject to change over time. For the most recent
list of H3C QSFP+/QSFP28 transceiver modules and
QSFP+/QSFP28 DAC cables available for the card, contact H3C
Support or marketing staff.
For more information about H3C QSFP+/QSFP28 transceiver
modules and QSFP+/QSFP28 DAC cables, see
H3C Transceiver
Modules User Guide
at www.h3c.com.
LEDs
Table 9 describes QSFP28 port LEDs and QSFP+ port LEDs on the
front panel.
Table 9 QSFP28 port LED description
LED status Description
Steady green
A transceiver module is installed in the port. The
port is operating at 100 Gbps, and a link is present
on the port.
Flashing green The port is sending or receiving data at 100 Gbps.
Steady yellow
A transceiver module is installed in the port. The
port is operating at 10/40 Gbps, and a link is
present on the port.
Flashing yellow
(3 Hz) The port is sending or receiving data at 10/40
Gbps.