H3C LSWM116FC, Руководство пользователя

Страница: 14 / 15

11
Figure 3 Installing an LSWM116FC interface module
Removing an interface module
CAUTION:
•
Before you remove an interface module, remove the cable
from it to avoid cable damage.
•
After removing an interface module, if no new interface
module is to be installed, install the filler panel as soon as
possible to prevent dust and ensure good ventilation in the
device.
To remove an interface module:
1. Prepare an anti-static bag.
2. Press the latch to release the ejector lever
3. Rotate outward the ejector lever as shown by callout 1 in Figure
4 .
4. Pull out the interface module slowly out of the interface module
slot, as shown by callout 2 in
Figure 4 .
5. Place the removed interface module in the anti-static bag.
1
2