4
LSQM1WCMB0 AC module quick
start guide
NOTE:
The models listed in this manual are not applicable to all regions. Please consult H3C
representatives for the models applicable to your region. Further information, such as
optional installation and configuration procedures and technical specifications about
connections and power is available in the
H3C LSQM1WCMB0 Access Controller Module
Installation Guide
.
The LSQM1WCMB0 access controller module provides wireless access control
functionality. It is powered by the power supply of the switch in which it is installed and
establishes a 10 Gbps communication channel with the switch through an internal
interface to implement the wireless access control functionality. The LSQM1WCMB0
access controller module starts working as soon as it is installed into a slot of a switch.
Installation preparations
This section contains information about unpacking and inspection of the product,
examination of the installation site, and preparing installation tools.
Unpacking and inspection
Before unpacking the package, ensure that the package is not damaged and that it
does not show signs of water damage. While opening the package and removing the
contents, avoid using excessive force.
The accessories vary with the models. For the exact contents of the package, refer to
the packing list. If the contents do not match the packing list, contact your H3C
representative.
If the package is found to be rusted or water soaked, stop unpacking and contact your
H3C representative immediately.
