Installation Manual
H3C SecPath F1800-A Firewall
Chapter 3 Installation
3-3
Figure 3-2
Installing the brackets
Step 3:
Mount the equipment to the rack.
1)
Lift the SecPath a little higher than the shelf or guides in the rack;
2)
Put the SecPath on the shelf or guides;
3)
Push it into the rack.
Step 4:
Fix the equipment to the rack.
Fix the equipment to the rack with M3 screw through brackets, as shown in
.
1
2
3
4
5
1. rack
2. Mounting brackets (without cabling racks)
3. Mounting screws
4. SecPath1000
5. Guides
Figure 3-3
Installing the SecPath into a rack
3.2.2 Mounting a SecPath onto the Workbench
In most cases, the SecPath is often placed on a clean bench. This mounting method
is simple.
