H3C H3C S5100-SI, Руководство по эксплуатации, Страница: 588 / 830

1-7
Enter user interface view of one
or more user interfaces user-interface vty first-number
[ last-number ]
—
Configure the authentication
mode as scheme authentication-mode scheme
[ command-authorization ]
Required
By default, the user interface
authentication mode is
password.
Specify the supported
protocol(s)
protocol inbound { all | ssh }
Optional
By default, both Telnet and
SSH are supported.
z
If you have configured a user interface to support SSH protocol, you must configure AAA
authentication for the user interface by using the authentication-mode scheme command to
ensure successful login.
z
On a user interface, if the authentication-mode password or authentication-mode none
command has been executed, the protocol inbound ssh command is not available. Similarly, if
the protocol inbound ssh command has been executed, the authentication-mode password
and authentication-mode none commands are not available.
Configuring the SSH Management Functions
The SSH server provides a number of management functions to prevent illegal operations such as
malicious password guess, guaranteeing the security of SSH connections. You can specify the IP
address or the interface corresponding to the IP address for the SSH server to provide SSH access
services for clients. In this way, the SSH client accesses the SSH server only using the specified IP
address. This increases the service manageability when the SSH server has multiple interfaces and IP
addresses.
Table 1-4 Follow these steps to configure SSH management functions:
To do... Use the command... Remarks
Enter system view system-view —
Set the SSH authentication
timeout time
ssh server timeout seconds
Optional
By default, the SSH
authentication timeout time is 60
seconds.
Set the number of SSH
authentication retry attempts ssh server
authentication-retries
times
Optional
By default, the number of SSH
authentication retry attempts is 3.
Set the RSA server key update
interval ssh server rekey-interval
hours
Optional
By default, the system does not
update the RSA server keys.
Configure a login header header shell text
Optional
By default, no login header is
configured.