H3C EWP-WA6630X-JP-FIT, Руководство по установке

Страница: 26 / 34

2-16
Figure 2-27 Securing the AP
5. As shown by callout 1 in Figure 2-28 , use a T8 Torx screwdriver to loosen the two screws on
the base so that the AP can rotate.
6. Rotate and adjust the AP until the bubble in the level is in the middle.
7. Fasten the two screws on the base to fix the rotation shaft of the AP.
Figure 2-28 Adjusting the AP
Mounting the AP on a wall
No expansion bolts are provided with the AP. Prepare them yourself as needed.
To mount the AP on a wall:
1. Mark the installation holes on the wall based on the installation holes on the AP base.
The dimensions of the installation holes on the AP base are shown in Figure 2-29 .
Level
Bubble