31
Figure 67 Verifying the new volume
Red Hat systems
1.
Configure FCoE on the FCoE storage device and ICMs and make sure the FCoE link is
unblocked. For more information about configuring FCoE on ICMs, see the command
references and configuration guides for ICMs and
H3C UniServer B16000 Blade Server
Configuration Examples
.
2.
Execute the
service
fcoe
start
and
service
lldpad
start
commands to enable the
FCoE and LLDP services, respectively.
Figure 68 Enabling the FCoE and LLDP services
3.
Execute the
service
fcoe
status
and
service
lldpad
status
commands to verify
that the FCoE and LLDP services are enabled.
Figure 69 Verifying the state of the FCoE and LLDP services
4.
Execute the
cp cfg-ethX
cfg
-
ethM
command in the
/etc/fcoe
directory to create and copy
a configuration file for the FCoE port. The
cfg
-
ethM
argument represents the port used for
FCoE connection.
