H3C CR16000-F, Руководство по установке

Страница: 18 / 105

12
Figure 9 CR16010E-F chassis depth
NOTE:
•
If the rack does not meet the requirements described in Table 5 , the rack door might fail to be
closed after you install the router of standard configurations in the rack.
•
The signal cables and power cords are routed through the front of the chassis. If you use power
cords that has a conductor cross-section area of a minimum of 16 sq mm (0.02 sq in), leave more
space between the front rack posts and the front door as appropriate.
Tools and equipment
No installation tools and equipment are provided with the router. Prepare installation tools and
equipment yourself as required.
Table 6 lists the tools and equipment that you might use during
installation.
Table 6 Tools and equipment list
Category Tool
Measuring and marking tools
Long tape
Ruler (1 meter, or 3.28 ft)
Gradienter
Marker
Chalk line
Pencil