H3C ANT-5011P-M3, Руководство по установке

Страница: 6 / 7

Manual Version:5PW100-20120627
5
Figure 4 Antenna mounting details
(1) U-bolt (2) Mast
(3) Mast-mount clamp (4) L-mounting bracket
(5) Installation hole for the L-mounting bracket (6) Orientation hole for the L-mounting bracket
To mount the antenna on a mast:
1.
Use four M4 nuts, four flat washers, and four spring washers to attach the L-type mounting bracket
to the antenna. See callout 6 in
Figure 5 .
2.
Place the U-bolt around the mast, and pass the U-bolt through the target installation holes on the
mast-mount clamp.
3.
Place a spring washer and flat washer on each end of the U-bolt, start an M6 hex nut on each end
of the U-bolt and tighten the nut with an adjustable wrench.
4.
To change the orientation of the antenna, select different installation holes as needed. See callouts
5 and 6 in
Figure 4 .