Manual Version:5PW100-20120627
6
Figure 6
Attaching the L-mounting bracket to the antenna
(1) Grounding terminal
(2) M8 hex nut, spring washer, and flat washer
(3) L-mounting bracket
2.
Place a U-bolt around the mast, and pass the U-bolt through the target installation holes on the
U-mounting bracket. Make sure the antenna is vertical to the ground.
3.
Place a spring washer and flat washer on each end of the U-bolt, start an M8 hex nut on each end
of the U-bolt and tighten the nut with an adjustable wrench.
4.
Repeat Steps 2 and 3 to attach the other U-bolt to the mounting brackets.
