6
2.
Insert the wall anchors into the two 7 mm (0.28 in) holes in the wall. Then thread the screws
through holes in the antenna. See
Figure 8 Mounting the antenna
3.
Insert the screws into the two wall anchors and fasten them until the antenna is secured in place.
See
Figure 9 Securing the antenna
Recommended cable
As a best practice, use a high-quality, low-loss cable with the antenna. Coaxial cable loses efficiency
as the frequency increases, causing signal loss. Keep the cable as short as possible because cable
length also causes signal loss (the longer the run, the greater the loss).
