Manual Version:5PW100-20120627
7
Figure 9
Paper mounting template
2.
Fasten the mount clamps to the T-rail as shown in
Figure 10
Fastening mount clamps to the T-rail
(1) Mount clamp
(2) T-rail
3.
Thread the antenna cable through the holes you drilled in step 1 until the base of the antenna is
flush with the ceiling.
4.
Fasten the clips to the mount clamps until the antenna is secured in place. See
.
Figure 11
Fastening the clips
(1) Cable
(2) Clip
(3) Mount clamp
Recommended cable
H3C recommends that you use a high-quality, low-loss cable with the antenna. Coaxial cable loses
efficiency as the frequency increases, causing signal loss. Keep the cable as short as possible because
cable length also causes signal loss (the longer the run, the greater the loss).
