H3C ANT-2015P-M3, Руководство по установке

Страница: 5 / 7

Manual Version:5PW100-20120627
4
{
Nine M6 nuts
{
Nine 6 mm (0.24 in) diameter flat washers
{
Nine 6 mm (0.24 in) diameter spring washers
{
One shaft sleeve with an inner diameter of 6 mm (0.24 in)
{
One mast-mount clamp with a plate attached to it
{
One mast-mount clamp
{
One antenna bracket
• User-supplied tools and accessories:
{
One knife
{
One cable tie
{
Grounding cable
{
One adjustable wrench
{
Sealant tape and sealing clay
{
One mast with a diameter of 40 to 70 mm (1.57 to 2.76 in)
Mounting the antenna on a mast
1.
Attach the antenna bracket to the studs on the antenna. See Figure 4 .
2.
Install a flat washer, a spring washer, and an M6 nut on each stud and tighten the nuts with an
adjustable wrench.
Figure 4 Attaching the antenna bracket to the antenna
3.
Use an M6 bolt to attach the antenna bracket to the mast-mount clamp that has a plate attached to
it. Install a flat washer, a spring washer, and an M6 nut on the bolt and tighten the nut with an
adjustable wrench. See Figure 5 .