2
1
Installation accessories
No installation tools are provided with the switch. Prepare them yourself as required.
Flathead screwdriver Phillips screwdriver
Needle-nose pliers
ESD wrist strap
Diagonal pliers
Marker
Installation tools
H3C Fixed Port Campus Switches Installation Quick Start-6W101
Mounting the switch in a rack
The applicable installation accessories vary by switch model. The packing list describes the
accessories provided with the switch. For the accessories not provided with the switch, purchase
them yourself as required.
To rack-mount a switch not provided with mounting brackets, purchase mounting brackets from
H3C and prepare cage nuts and M6 screws yourself.
Grounding cable
Releasable cable tie
Rubber feet
Cage nut and M6 screw
Power cord retaining clip
Attach the front mounting brackets to the switch
Rubber hammer
Hammer drill
Screw anchor and screw
!
Wear an ESD wrist strap during the installation. Make sure the wrist strap makes good skin contact
and is reliably grounded.
Attach a Type A front mounting bracket
near the power module side
Attach a Type A front mounting bracket
near the port side
!
This installation method is not applicable to a switch provided with both front and rear mounting
brackets.
The applicable front mounting brackets and the installation positions for the brackets vary by
switch model. Select an installation position for the mounting brackets as required.
Two screws are required to attach a Type A, Type C, Type D, Type E, or Type F front mounting
bracket. Four screws are required to attach a Type B front mounting bracket.
Using front mounting brackets
1
Rear mounting bracket
and shoulder screw
Front mounting brackets and M4 screw
1
Other installation accessories
(Type D)
(Type C)
(Type B)
(Type E)
Standard front
mounting brackets
Product code: SOHO-SWITCH-FL-02
Product code: LS5-FL-D
Type of front
mounting brackets
Figures
(Type F)
Product code: SOHO-SWITCH-FL-01
Long front mounting
brackets
2
Heat gun
Wire stripper
(Type A)