H3 Falcon 4010, Быстрое руководство по установке

Страница: 11 / 24

8
Cabling Guide
This guide is demonstrated with host port 1:H1. Also applies to host port 2:H1, 1:H2 and 2:H2 (host mode).
1 port x16 lanes
Connect the correspond ports as shown in the diagram.
Host - Chassis
0 - 0
1 - 1
2 - 2
3 - 3
The connected host will be recognized
as 1:H1 on the GUI
2 ports x8 lanes (Advanced mode)
Connect the corresponding ports as shown in the diagram.
After booting up Falcon 4010,
Go to GUI
→
Port Configuration
Set the host port to 2x8 mode before power on the host machines.
Host 1 - Chassis
0 - 0
1 - 1
Host 2 - Chassis
0 - 2
1 - 3
Host 1 will be recognized as 1:H1.0
Host 2 will be recognized as 1:H1.1