Charger H-TRONIC APC 300 with plug Tamiya
Read these instructions carefully. For damages caused by disregard of these instructions, the warranty is not
responsible! In order to ensure safe operation, the user must follow the safety instructions and warnings.
Application:
Designed for charging of 4 - 8 cells in series (4.8V-9.6V). Charges NiMH and NiCd. Charging current is set according to
the number of battery cells.
- Any use other than that specified is not permitted!
Working conditions:
- The device can be operated only with 230 V / 50 Hz AC voltage.
- Exceeding these values may cause damage to the device or battery.
- It is desirable for the working position of the device.
- The device can not be opened!
- Loaded can only NiCd and NiMH batteries!
- Permissible ambient temperature during operation (room temperature) may not fall below 0 ° C and exceed 40 ° C
- The device is intended for use in dry and clean rooms.
- The unit should be kept away from flower vases, bathtubs, sinks, lotions, etc.
- When the unit outdoors or in wet areas is not allowed!
- This device is not a toy, it is not suitable for children and adolescents under 14 years!
- In schools, training centers, hobby and self-help workshops the operation of the device is
trained personnel must be supervised.
- Using the devices are not present in the environment in which flammable gases, vapors or dust
or may be present.
- The unit must always be switched off from the power supply after use!
- Before starting the unit, check whether the use is appropriate
- Please note that operational errors, and the connections are beyond our control.
Operation:
Connect the charger to the mains (230V / 50 Hz).
Insert the battery charger - charging light on the device turns on.
The battery is charged as long as it is connected to the device.
Completion of charging takes place when the power is disconnected. Therefore, the charging process should be
stopped after the time given in the table:
Following the charging times, you can avoid overloading the battery!
Determining the charging time:
Check the load times for 100 mAh in the column with the correct number of cells and choose the appropriate
charging time.
The calculation of charging times, such as:
Package 6-cell (7.2V) 700 mAh -bateria.
Load time of 100 mAh according to table = 45 min (7 x 45 minutes = 315 minutes = 5 h 15 min)
Technical data:
Supply voltage: 230V / 50Hz
