
file: n:\article\cos101676-en\20210629_cos101676-en_hpcosmos_airwalk_ap_unweighting_ifu_iim_manual.docx
© 1988 - 2021 h/p/cosmos sports & medical gmbh phone +49 86 69 86 42 0 [email protected] created 29.06.2021 printed 29.06.2021 page: 31 of 43
8.
Pull rope through the cable
guide module (depicted:
unweighting unit on right-hand
side).
Cover the screw heads with
the plastic caps.
Tilt the device back up again.
9.
Insert the adjustable stop
module and fix with 4x M8x25
lens-head screws.
NOTE: the rope has to run
through the slot in the middle
of the slide!
In case that the device is
equipped with the optional
safety stop switch see chapter
“options” for further
instructions.
10.
Place the pair of rails in front
of the component box.
Adjust the gap between the
front and back rail part
according to the treadmill type,
fix position with 4x M8x16
lens-head screw:
150/50 – no gap
170/65 – 20 cm gap
190/65 – 40 cm gap
NOTE: to avoid collision risk
with certain treadmill
accessories (e.g. Zebris visual
stimulation) it might be
necessary to adjust the gap so
that the treadmill inclination
path is unblocked.
11.
Adjust the rail distance
according to treadmill type.
Inner pair of holes (orange) for
xx/50, outer pair (green) for
xx/65 size.
Attach rails to the component
box using 12x M12x30
cylinder head screws with
washers. Use 85 Nm torque.