PHOTO 8 PHOTO 9
PHOTO 10
-To remove the filter twist in anticlockwise direction and pull out the filter shield.
PHOTO 10
PHOTO 11&12
- Pull out filter, pat the filter first then using warm, soapy water to wash the filter
and ensure it is completely dry before using it again. The cleaner filter, the better the product
will perform. It is very important that the filter is correctly in position before use.
CAUTION:
Filter must be dry before re-assembling.
图
10
PHOTO 11 PHOTO 12
IMPORTANT:
Maximum dust collection will only be obtained with clean filter and an empty
Cyclone bin. If dust begins to fall back out of the product after it is switched off, this indicates
