H-KING Wargo MX2 3D Скачать руководство пользователя страница 2

The Wargo Signature MX2 is the next step of my goal to provide a line 

of perfect 3D and aerobatic training aircraft. I have dedicated a lot of 

my flying career to teaching 3D aerobatics and helping pilots learn how 

to become better pilots. I have also dedicated myself to trying to develop 

the ideal transition and training 3D plane. I am proud to offer you the 

Wargo MX2. It is a foam aircraft that is stiffer and precise with a short 

moment to improve your 3D, Tumbling and precision flying. The Wargo 

MX2 is perfect to take a pilot from sport flying to confidently flying 3D 

aerobatics. Michael has dedicated much of his career to aerobatic 

training and teaching 3D aerobatics and trying to find the ideal foamy 

to take pilots to the next level. The result is a phenomenal plane that 

will hover, harrier and tumble incredibly well. Any accomplished 3D pilot 

will love this plane because it will satisfy the most discriminating pilot. It 

will perform maneuvers ultra-light foamies cannot because it has a bit 

better ability to carry momentum and perform more high-energy and 

tumbling type of maneuvers. The Wargo MX2 is a blast to fly, and is 

small and light enough to fly anywhere and transport just as easily.   

I hope you enjoy flying your new plane as much as I enjoy it. 

Happy Flying!

1

Содержание Wargo MX2 3D













Отзывы: