28. Glue a pair of
magnets
to
the batter
y
hatch
part A14.
29. Glue another pair of magnets to the corresponding
part of the fuselage where the battery hatch fits. Ensure
the polarity of the magnets are correct so that they
attract and not repel.
30.
Laminate together the root ribs B1
/B2 and B3.
Note: B1 has a front piece which is added later.
The basic fuselage is now finished
, s
and the entire assembly and smooth and round
of
f
the
corners
.
Wing Assembly.
(Build the 2 wings on a flat surface to avoid any twisting)
31. Position and glue to the
2
off
6x8mm
main
spars
,
wing ribs B4 and B5, B5 are the center ribs.
Also add
the rear spars B7 and B8.
32. Add the vertical webbing B10 to the front 2
spars from underneath.
33. Add the root rib assembly that you laminate
d
at step 30.
Page 9
