H-KING 9700000021-0, Инструкция по эксплуатации

Страница: 6 / 10

5
Apply foam glue on the slot of the vertical tail and the centre part of the horizontal tail (both sides).
Then insert the horizontal tail into the slot of the vertical tail.
Ensure the fin and the stabiliser are perpendicular to
each other and true to the wing, then wait for the glue to
dry.
After the glue thoroughly dried, you may remove all the
clamps at this moment. Cut the canopy by using a model-
ling knife. Don’t cut the front! The front part will act like a
hinge.
Remove the motor mount and install motor and prop. Assemble the quick rod adjusters and install it on the
control surfaces, apply loctite glue on all the bolts.