![H.C Duke & Son ELECTRO FREEZE Arctic Swirl HDM75A Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/h-c-duke-and-son/electro-freeze-arctic-swirl-hdm75a/electro-freeze-arctic-swirl-hdm75a_operators-manual_574325020.webp)
ELECTRO FREEZE Arctic Swirl Model HDM75A
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
184915
H.C. Duke & Son, Inc.
13
6.2
Top Bearing Replacement
6.3
Bottom Bearing Replacement
6.1
Spindle Shaft Replacement
- continued
and potentiometer wires (41) loop away
from moving parts when reinstalling
motor cover assembly. Wires must not
touch the louvers in the motor cover
assembly (32).
NOTE:
If you are experiencing difficulty
aligning the mixer shaft, call the Electro
Freeze Service Department for assis-
tance.
12. Check for shaft vibration by
operating the mixer, slowly turning the
speed control from low to high. If the
shaft is vibrating, adjust for proper
alignment.
1. Repeat steps 1 through 9 of the
Spindle Shaft Replacement, paragraph
6-1.
2. Replace the bottom bearing (19),
two screws (14) and washers (15, 16).
NOTE:
Replace bearings if damaged by
heat.
NOTE:
You MUST reapply Loctite to the
shaft, pulley, and bearings according to
the manufacturer’s recommendations
when you reassemble these parts.
10. Slide the new shaft up through
the lower bearing and the upper bearing.
Visually align the shaft and tighten the
bearing housing. Install the pulley.
11. Reverse the above steps to
reassemble. Make sure there is proper
belt tension of 5/16 inch (refer to para-
graph 5-2). Ensure toggle switch (40)
3. Reverse the above steps to
reassemble. (You
MUST
reapply Loctite
RC/680 adhesive to the shaft, pulley,
and bearings according to the manufac-
turer’s recommendations.)
3. Reverse the above steps to
reassemble. (You
MUST
clean parts
thoroughly before reassembly and
application of Loctite — You
MUST
reapply Loctite RC/680
®
adhesive to the
shaft, pulley, and bearings according to
the manufacturer’s recommendations.)
1. Repeat steps 1 through 9 of the
Spindle Shaft Replacement, paragraph
6-1.
2. Replace the top bearing (19) and,
two screws (14) and washers (15, 16).