GYS GYSFLASH 30.12 HF, Руководство пользователя

Страница: 21 / 76

21
GYSFLASH 30.12 HF
EN
6
Displays for 1s :
« no battery »
+ alarm beep
Showroom mode is working on
« no battery »
Showroom without battery : GYSFLASH operating normally.
To deactivate the "no battery" function, press the "START/STOP" key, and then
press the "START/STOP" key again to start the Showroom mode with battery.
7
The device is locked in Showroom
mode
Lock Showroom active
Normal operation of GYSFLASH.
Refer to configuration menu to deactivate this function.
8
Screen displays :
« #error T(°C) »
+ alarm beep
Faulty fan Contact your distributor.
Extended exposure to sunlight
Do not leave the device exposed to sunlight.
Leave the device ON until the fault disappears. (The alarm beep can be stoppe-
dPossibility to stop the alarm beep by pressing the START/STOP key).
9
Screen displays :
« #error IHM »
+ alarm beep
Electronic fault Contact your distributor.
10
Screen displays :
« #error fuse »
+ alarm beep
Mishandling
Internal fuse must be changed by a qualified person
(ref. 054646 : 40A).
11 The device doesn't display anything
Input fuse HS
Input fuse must be changed by a qualified person
(temporised fuse 10A 5x20, ref. 054530).
Faulty electrical network Check the voltage of the electrical network is between 180V and 260V.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported.