2
2.
Insert four AA batteries into the keyboard.
3.
Press and hold the
Learn
button on the receiver for two
seconds, and then release it. The
Status
light will blink
slowly, indicating the receiver is in “Learn Mode.”
4.
Press and release the
Teach
button located on the back
of the keyboard (see below). The
Status
light on the
receiver will blink rapidly for four seconds, then begin to
blink slowly.
Note:
At this time, press the
Teach
button on any additional devices
(such as a second keyboard, an Ultra Mouse, or a GyroRe-
mote).
5.
To exit Learn Mode, press the
Learn
button on the
receiver for two seconds. Otherwise, Learn Mode will
automatically time out after five minutes.
If more than one Gyration device is being installed on the
same system, place the receiver into Learn Mode (step 3
