7
1.
Locate the positions of the holes. Paste installation positioning stickers on the
ceiling and lead the cables through the hole on the wall.
2.
Mount your camera.
3.
Adjust the monitoring direction of the lens. Tighten the screws after vertically
adjusting the lens.
Paste the drill template and lead the
cables through the hole. Use a Ø6mm-
6.5mm drill bit to drill 30 mm-depth
guide holes according to the template.
Knock the plastic rivets into the
guide holes and ensure that they
are tightened up.
1
2
1
Connect all cables of the ceiling
and your camera.
Lead self-tapping screws
through the guide holes in the
camera base, and fix your
camera on the ceiling by using
a screwdriver.
2
Lens base
Rotate the lens base
horizontally.
1
Fastening screw
2
Loosen the fastening
screws and rotate the
lens vertically.
Lens
Rotate the lens horizontally.
3