1. Mode instruction
2. Instructions of the standby
mode control
Standby Mode
3. Instructions of manual mode control (primary mode)
04 Learn to use WalkingPad
09
10
Standby Mode
Light of the Standby mode is on;
Motor and sensor stop responding.
Manual Mode
Light of the manual mode is on;
Control the speed through the remote
control or APP.
Automatic Mode
Light of the automatic mode is on;
Speed is automatically controlled by
intelligent algorithm.
It follows the speed of walking.
The motor and sensor stop responding
in this mode to prevent nonusers from
accidentally triggering the WalkingPad.
In this mode, the speed of the WalkingPad can be controlled by the remote
control. It is recommended that beginners use the manual mode first and
then use the automatic mode after being skilled in using the WalkingPad.
The manual mode is controlled by remote control by default, that is, the
START/STOP button of the remote control is used to start or stop the Walk-
ingPad, which can be modified in the client "Personalized".
Mode Switch
Short press: return to the previous mode.
Manual Mode
MODE SWITCH
Short press: switch to automatic mode.
Long press: switch to
S
tandby mode.
ACCELERATION
Short press: increase speed by 0.5 km/h.
START/STOP
Short press:
S
tart or
S
top the WalkingPad.
DECELERATION
Short press: reduce speed by 0.5 km/h.
In the manual mode, set as
the intelligent start and stop,
the WalkingPad will start
automatically to the target
speed (default is 3 km/h )
while entering this area.
