15
GB6.0 EXERCISE BIKE
CONSOLE OPERATION INSTRUCTIONS
III. Operation
1.
Install batteries (or press RESET KEY for 2 seconds), the BUZZER beep sound, and LCD full display 2
seconds (Figure 1). Then display wheel diameter, KM or ML, and Fat symbol “E” for 1 second (Figure 2).
The console will go to Standby mode (Figure 3). At this point, the motor reverses to Load 1.
2.
In standby mode (Figure 3), press MODE/ENTER button to select mode:
MANUAL→P01→P02→P03→P04→P05→P06→P07→P08→P09→P10→
P11→P12→P13→P14→P15→P16→P17 (recyclable).
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 6.
Figure 5.
3.
If user chooses “MANUAL” mode, press “MODE” button directly and go to “TIME” setting. Rotate knob
UP(+) /DOWN (-) to adjust value, then press “MODE". Go to next setting: set “Distance/ Calorie”
(Figure 5). After setting, press “START/STOP” button, console start to exercise and calculate.
Rotate knob UP (+) /DOWN (-)to adjust LOAD level.
4.
P01 mode (Figure 6)- In any mode, user can press “START/STOP”button and then“RESET”button to go
back to main menu. “MANUAL” is flashing, rotate knob UP (+) once, go to “P01”mode, set target “TIME”,
rotate knob UP (+) /DOWN (-) to adjust the value or directly press START to start exercise. When the TIME
counts down to 0:00, system stop exercising automatically. User can also press “START/STOP” to stop
during workout.
5.
The operation procedure of P02~P12 is same as P01.
